| SCAT ENGINE CASES - ACCESSORIES |
 |
 |
CASE ACCESSORIES & REPLACEMENT PARTS
| Part# |
Description |
Price |
Buy Online |
| 22001 |
7/16"-20 4140 Chromoly Case Through Stud w/Nut & Washer |
$10.95 |
 |
| 22002 |
Hollow Dowel Pin for Case half Alignment .550" O.D. |
$6.29 |
|
| 22003 |
Main Bearing Dowel Pins, Set of 5 Pieces |
$4.99 |
|
| 22004 |
Hollow Dowel Pin for Front Cover Alignment |
$4.99 |
|
| 22006 |
Front Seal for use with SCAT Pulley |
$7.32 |
|
| 22008 |
10mm 4140 Chromoly Cylinder Head Studs w/Nut & Washer VW Dual-Port Head to SCAT KILLER™ Case, Set of 16 Pieces |
$89.00 |
|
| 22010 |
10mm 4140 Chromoly Cylinder Head Studs w/Nut & Washer SCAT Split-Port Heads to SCAT KILLER™ Case, Set of 16 Pieces (Extra-long custom length cylinders requires special length studs) |
$89.00 |
|
| 22309 |
Cast Aluminum Center Mount Alt/Gen Tower |
$70.74 |
|
| 22310 |
Center Mount Aluminum Fan Housing |
$294.94 |
|
| 80181 |
Sand Seal Pulley 5-3/8" w/Belt Groove fits SCAT KILLER™ or VW Case |
$32.95 |
|
| 80251 |
Sand Seal Pulley 5-3/8" w/o Belt Groove fits SCAT KILLER™ or VW Case |
$34.95 |
|
| 10079 |
Flange Oil Seal for Flywheels |
$11.75 |
|
| 10184 |
Flange Oil Seal for Dowel Pin Crankshafts |
$18.55 |
|
|
|
BILLET DRY & WET SUMP OIL PUMPS
- For use with SCAT KILLER™ Case installations
- Designed to provide a 2 to 1 scavenge to pressure ratio
|
 |
| Part# |
Description |
Price |
Buy Online |
| 50069 |
Dry Sump Oil Pump Carbureted |
$499.00 |
|
|
|
DRY SUMP OIL FILTER BRACKET WITH PRESSURE RELIEF
- Remote oil filter bracket with built-in adjustable pressure relief with by-pass for excess oil back to oil tank without entering engine first & picking up excess heat
- For use with any high-performance engine with a dry sump oil system
|
 |
| Part# |
Description |
Price |
Buy Online |
| 50073 |
Dry Sump Oil Filter Bracket |
$74.93 |
|
|
|
NEW UNIVERSAL TYPE I DUAL BY-PASS ENGINE CASES
- All Modified Engine Cases are INSPECTED, STROKE RELIEVED, BORED for either 90.5mm, 92.0mm or 94mm CYLINDERS, SHUFFLE PINNED and the OIL GALLERIES ARE DRILLED & TAPPED for FULL FLOW - Steel case savers are installed allowing use of 8mm stud kits
|
|
| Part# |
Description |
Price |
Buy Online |
| 043101025 |
Type I Universal Dual By-Pass Engine Case |
$609.00 |
|
| 101025-92 |
Universal Case Bored for 90.5mm / 92mm Cylinders |
$669.00 |
|
| 101025-94 |
Universal Case Bored for 94mm Cylinders |
$689.00 |
|
| 10183 |
Modified Case - 92mm Bore, Stroke Relieved, Shuffle pinned |
$799.00 |
|
| 10183-1 |
Modified Case - 94mm Bore, Stroke Relieved, Shuffle pinned |
$799.00 |
|
| 10186 |
Stroker Case - 92mm Bore, Stroke Relieved, Full Flow |
$730.00 |
|
| 10186-1 |
Stroker Case - 94mm Bore, Stroke Relieved, Full Flow |
$730.00 |
|
|
|
HIGH PERFORMANCE SUPER CASE
- Main oil galley drilled & Tapped for easy clean out
- Shuffle pins installed on center main saddles
- Reinforced behind #3 Cylinder
- Drilled & Tapped for full flow oil filter
- Clearanced for 86mm Crankshafts
- Your choice of Bores - 85.50, 90.5/92, or 94mm
|
|
| Part# |
Description |
Price |
Buy Online |
| 10183-1A |
High Performance Super Case |
$749.00 |
|
|
|
ENGINE CASE PERFORMANCE STUD KITS
- Approx. 200% stronger than stock studs - 145,000 to 190,000 PSI tensile strength
- Designed for stock and stroker engines
- This kit includes 16 performance chromoly studs, washers and nuts
- These performance studs will not stretch or break under race conditions
|
|
| Part# |
Description |
Price |
Buy Online |
| 10170 |
8mm 4140 - F4 Chromoly Dual-Port Cylinder
Stud Kit W/Heavy-Duty Hardware - 150,000 PSI |
$53.70 |
|
| 10171 |
10mm 4140 - F4 Chromoly Dual-Port Cylinder
Stud Kit W/Heavy-Duty Hardware |
$64.95 |
|
| 10172 |
8mm 8740 (190,000 PSI TENSILE STRENGTH)
Dual-Port Stud Kit w/H.D. Hardware (Turbo Kit) |
$74.95 |
|
|
|
STEEL CASE SAVERS - 16-PIECE SET
A must for all high-performance applications
- For VW Type 1-3 40HP - 1600 cases
- A positive method of repairing stripped case threads by restoring threads to their original sizes
- For preventative measure on brand new engine cases by providing a stronger anchor for head studs than original
|
|
| Part# |
Description |
Price |
Buy Online |
| 20133 |
14.2mm O.D. x 10mm |
$8.49 |
|
| 20134 |
14.2mm O.D. x 8mm |
$8.49 |
|
| 20135 |
.500"/12.75mm O.D. x 10mm - for 92mm O.D. Cylinders |
$8.49 |
|
|
|
UPGRADE TYPE I ENGINE CASE HARDWARE KIT
- Hex Head and Show Chrome Plunger Plugs
- Heat Treating Engine Mounting Studs
- Oil Boost Springs, Plungers and Pump Studs
|
|
| Part# |
Description |
Price |
Buy Online |
| 10205 |
Engine Case Installation Kit |
$21.21 |
|
| 50022 |
Oil Booster kit - Single by-pass kit only (sold separately) |
$2.99 |
|
| 50025 |
Oil Booster - Dual by-pass kit only (sold separately) |
$3.99 |
|
| 99628 |
18mm Oil Hex Plug |
$3.50 |
|
|
|
TYPE III BLOCK OFF PLATE
- Block off case oil filler on Type 3 to convert into a Type I engine case
|
|
| Part# |
Description |
Price |
Buy Online |
| 10206 |
Type III to Type I Block Off Plate |
$2.49 |
|
|
|
ENGINE LOCK NUT KIT
- Ideal for any competition use especially Off-Road
- For VW Type 1-3 engine cases - 40-Piece Kit - Enough for one complete engine
- NYLOCK NUTS resist vibrations keeping engine tightly sealed
|
|
| Part# |
Description |
Price |
Buy Online |
| 10173 |
Engine Lock Nut Kit |
$5.31 |
|
|
|
ALUMINUM OIL GALLEY PLUG SET
- Special Anodized Aluminum AN Style Pipe Plugs that Replace all the Pressed-In Oil Gallery Plugs
- Facilitates Cleaning & Draining of Oil From Engine Case
- Kit = 5 pieces of 1/8", 2 pieces of 1/4", & 2 pieces of 3/8" plugs
|
|
| Part# |
Description |
Price |
Buy Online |
| 50033 |
Aluminum Oil Galley Plug Kit |
$13.95 |
|
|
