| CLUTCHES & FLYWHEELS SERIES 60 |
 |
SCAT CHROMOLY 12.5 LBS. NEW FORGED STEEL & IRON FLYWHEELS
- Drilled for SPG offset pattern 8 dowel pins
- 130 tooth (12-Volt) ring gear is hobbed directly from forging and is induction hardened
- Clutch face is precision ground to insure quick, smooth clutch action
- Fits all SCAT VOLKSTROKER Crankshafts and 8 Dowel Pin Type 1-3 Cranks
- Increased engine life plus faster acceleration
|
 |
| Part# |
Description |
Price |
Buy Online |
| 60007 |
FORGED 12-Volt, 1-piece, 8 Dowel, 200mm Chromoly Flywheel |
$124.00 |
 |
| 60007-1 |
IRON 12-Volt, 8 Dowel, Replaceable Ring Gear VW Flywheel |
$79.95 |
|
| 60030 |
Replacement Flywheel O-Ring Seal |
$1.29 |
|
| 10220 |
Crankshaft End Play Shims |
$8.99 |
|
|
|
DURABLE VW TYPE 1-3 CLUTCH DISCS
- Heat- and wear-resistant Metal Woven lined face
- For longer trouble free operation under heavy-duty conditions
- 180mm or 200mm sizes with Rigid or Spring type Hubs
- Replaces original equipment perfectly
|
 |
| Part# |
Description |
Price |
Buy Online |
| 60012 |
200mm w/Solid Hub |
$22.95 |
|
| 60042 |
200mm w/Spring Hub |
$24.00 |
|
| 60015 |
180mm w/Spring Hub |
$35.00 |
|
|
|
QUICK* SILVER LIGHTWEIGHT 4-PUCK STAINLESS STEEL RACING DISC
- Disk plate made from High Carbon Stainless Steel for Strength
- Heat-Treated and Long Splined Drive Hub adds control
- Copper + Feramic Pads Grab or Slip Rate is Controlled by Pressure Plate LBS. Grabs Hard = 2500lbs. Pressure or Slips into engagement = 1700lbs. Pressure
- Lightweight Balanced Design Cuts thru Windage and keeps Pads Working
- Race Proven to Decrease Drag Times (Damon Harmon)
- Thicker Pads for Longer Life and Better Surface Contact with Flywheel and Clutch Shoe
|
 |
| Part# |
Description |
Price |
Buy Online |
| 60046S |
QuickSilver Lightweight 4-Puck Stainless Steel Racing Disc |
$34.95 |
|
|
|
|
|
|
|
SCAT 4340 CHROMOLY BILLET 1-1/2" HEX GLAND NUT & HEAVY-DUTY WASHER
- Heat treated Gland Nut & Washer for maximum strength
- 1-1/2" HEX HEAD for maximum surface area insures even pressure on flywheel when tightening flywheel to crankshaft & thicker cross section for added strength
- Can be torqued to 350LBS. without fear of breakage or stretch
- Please use with all SCAT VOLKSTROKER Crankshafts & other after market performance crankshafts
|
 |
| Part# |
Description |
Price |
Buy Online |
| 60025 |
Chromoly 1-1/2" Hex Gland Nut & Washer |
$21.21 |
|
| 60026 |
.250" Longer Thread Chromoly Gland Nut & Washer |
$25.20 |
|
| 60036 |
Heat-Treated H.D.Gland Nut Washer |
$3.07 |
|
| 60069 |
Special 1-1/2" Hex Socket for 1/2" drive |
$11.95 |
|
|
|
CHROME VANADIUM CRANKSHAFT DOWEL PINS
- Longer than stock to ensure flywheel does not spin or come loose
- For VW Type 1-3
- Used on all SCAT VOLKSTROKER™II Pro-Street, Pro-Comp & Pro-Drag Crankshafts
- Heat treated for maximum strength & precision ground to exact tolerances
- 8mm Diameter x .900 /23mm Length
|
 |
| Part# |
Description |
Price |
Buy Online |
| 10056 |
Set, Dowel Pins & Gaskets |
$9.30 |
|
| 10072 |
10 Pack, 8 Dowel Pin Gaskets |
$3.31 |
|
| 10056-200 |
200 Pieces, 8mm Dowel Pins – Bulk |
$159.00 |
|
|
|
SACHS 200mm H.P. CLUTCH COVER
- Designed for “stop & go” street driving
- Works great with 1600-1915 engines
- Multi-Finger diaphragm sets face pressure at approximately 1200 lbs.
|
 |
| Part# |
Description |
Price |
Buy Online |
| 311141025E |
Early Swing axle 200mm pressure plate with collar |
$49.95 |
|
| 311141025C |
Late I.R.S. 200mm pressure plate without collar |
$49.95 |
|
|
|
KENNEDY RACING 2000LB. & 2500LB. MULTI-FINGER CLUTCHES
- Balanced with-in 0.4 oz.
- 100% Load Tested and Jig Assembled to Insure Proper Pressure
- Contact Face is High-Tensile Cast-Iron Alloy for Maximum Strength
|
 |
| Part# |
Description |
Price |
Buy Online |
| KEP1700 |
1700 LB. Multi-Finger Racing Clutch E&L – Stage I |
$99.95 |
|
| KEP2100 |
2100 LB. Multi-Finger Racing Clutch E&L – Stage II |
$99.95 |
|
| KEP2500 |
2500 LB. Multi-Finger Racing Clutch E&L – Stage III |
$99.95 |
|
|
|
GERMAN QUALITY HEAVY-DUTY ROLLER THROW-OUT BEARINGS
- Special ball bearing type – replaces stock carbon-type bearing
- Ensures smoother improved clutch operation with reduced effort
- Longer wearing than stock type bearings
|
 |
| Part# |
Description |
Price |
Buy Online |
| 111141165A |
Early Bearing thru ’70 |
$32.95 |
|
| 111141165B |
Late Bearing ’71 & later |
$32.95 |
|
| 111141177 |
H/D Release Bearing Clip |
$0.99 |
|
|
|
HEAVY-DUTY CROSS SHAFT
- New shafts feature heavy steel bearing fingers and shaft
- Welded 360 degrees around bearing fingers
- Stronger than stock
- Swing Axle or IRS, Type 1 & 3
|
 |
| Part# |
Description |
Price |
Buy Online |
| 70150 |
Heavy-Duty Early ’70 & Earlier |
$17.22 |
|
| 70243 |
OEM Late ’71 & Later IRS |
$8.90 |
|
|
